首页> 外文会议>ASME Turbine Technical Conference and Exposition >Review of Coal-To-Synthetic Natural Gas (SNG) Production Methods and Modeling of SNG Production in an Entrained-Flow Gasifer
【24h】

Review of Coal-To-Synthetic Natural Gas (SNG) Production Methods and Modeling of SNG Production in an Entrained-Flow Gasifer

机译:临床流动升降机中SNG生产的煤与合成天然气(SNG)生产方法和建模

获取原文

摘要

In this paper, the coal-to-synthetic natural gas (SNG) technologies have been reviewed. Steam-oxygen gasification, hydrogasification, and catalytic steam gasification are the three major gasification processes used in coal-to-SNG production. So far, only the steam-oxygen gasification process is commercially proven by installing a catalytic methanation reactor downstream of the gasification process after syngas is produced, cleaned, and shifted to achieve an appropriate H_2/CO ratio for methanation reaction. This process is expensive, less efficient, and time consuming. Ideally, it will be more effective and economic if methanation could be completed in an once-through entrainedflow gasifier. Technically, this idea is challenging because an effective gasification process is typically operated in a highpressure and high-temperature condition, which is not favorable for methanation reaction, which is exothermic. To investigate this idea, a computational model is established and a sensitivity study of methanation reactions with and without catalysts are conducted in this study. In modeling the methanation process in a gasifier, correct information of the reaction rates is extremely important. Most of known methanation reaction rates are tightly linked to the catalysts used. Since the non-catalytic reaction rates for methanation are not known in a gasifer and the issues are compounded by the fact that inherent minerals in coal ashes can also affect the methanation kinetics, modeling of methanation in an entrained-flow gasifier becomes very challenging. Considering these issues, instead of trying to obtain the correct methnation reaction rate, this study attempts to use computational model as a convenient tool to investigate the sensitivity of methane production under a wide range methanation reaction rates with and without catalysts. From this sensitivity study, it can be learned that the concept of implementing direct methanation in a once-through entrainedflow gasifier may not be attractive due to competitions of other reactions in a high-temperature environment. The production of SNG is limited to about 18% (vol) with catalytic reaction with a pre-exponential factor A in the order of 10~7. A further increase of the value of A to 10~(11) doesn't result in more production of SNG. This SNG production limit could be caused by the hightemperature and short residence time (3-4 seconds) in the entraind-flow gasifier.
机译:本文综述了煤与煤炭天然气(SNG)技术。蒸汽氧气气化,氢化和催化蒸汽气化是煤至SNG生产中使用的三种主要气化过程。到目前为止,只有在制造,清洁合成气后,通过在气化过程的下游安装催化甲烷化反应器,仅商业证明蒸汽 - 氧气气化过程,并使甲烷化反应的适当的H_2 / CO比。这个过程昂贵,效率较低,耗时。理想情况下,如果可以在一次通过夹带流化器中完成甲烷化,则将更有效和经济。从技术上讲,这种想法是挑战性的,因为有效的气化过程通常在高压和高温条件下操作,这对甲烷化反应不利,这是放热的。为了研究该思想,在该研究中建立了计算模型,并且在该研究中进行了对甲烷化反应的敏感性研究。在将甲烷化过程建模在气化炉中,反应速率的正确信息非常重要。大多数已知的甲烷化反应速率与所用催化剂紧密连接。由于甲烷化的非催化反应速率在胃肠中未知,因此通过煤灰中固有的矿物质也可以影响甲烷化动力学的事实,因此在夹带流动气化器中甲烷化的建模变得非常具有挑战性。考虑到这些问题,而不是试图获得正确的蜂产化反应速率,该研究试图使用计算模型作为一种方便的工具,以研究甲烷产量在宽范围内甲烷化反应速率下的甲烷产量的敏感性,而不是催化剂。从这种敏感性研究中,可以了解到,由于高温环境中的其他反应的竞争,在一张通过夹带流出器中实施直接甲烷化的概念可能没有吸引力。 SNG的产生限于约18%(体积),催化反应与预指数因子A为10〜7。进一步增加A至10〜(11)不会导致SNG的更多生产。该SNG生产限制可能是由夹带流动气体化器中的高温和短暂停留时间(3-4秒)引起的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号