首页> 外文会议>Modeling Aspects in Optical Metrology >Full-Duplex Transmission of FTTX/Ethernet Services in a RSOA Based WDM-PON Architecture using Polarization Multiplexing Technique
【24h】

Full-Duplex Transmission of FTTX/Ethernet Services in a RSOA Based WDM-PON Architecture using Polarization Multiplexing Technique

机译:使用偏振多路复用技术全双工FTTX /以太网服务在RSOA基于WDM-PON架构中的传输

获取原文

摘要

In this paper a simple architecture has been developed for full-duplex transmission of different services like Ethernet, FTTX etc through single optical carrier wavelength employing polarization multiplexing technique in the transmitter end and the user end simultaneously. 10 Gbps and 2.5 Gbps datarates are bidirectionally transported over 50 km single mode fiber (SMF) to provide Ethernet and FTTX services concurrently to the user. Reflective semiconductor optical amplifier (RSOA) is used to reuse and remodulate the downlink signal to uplink transmission. The upstream and the downstream transmission performances are observed by the bit error rate (BER) values and the eye diagrams obtained by the BER analyzer at both ends.
机译:在本文中,已经开发了一种简单的架构,用于通过在发送器端和用户端中采用偏振多路复用技术的单光载波波长等不同服务的全双工传输。 10 Gbps和2.5 Gbps数据售票经双向运输超过50公里的单模光纤(SMF),以同时向用户提供以太网和FTTX服务。反射半导体光放大器(RSOA)用于重用并将下行链路信号重用以上行链路传输。通过两端的BER分析仪获得的钻头误差率(BER)值和眼图观察到上游和下游传输性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号