Experimental Study and Analysis of the Influence of Drawbead against Restriction and Deep Drawing Force of Rectangular Cup-Cans with Tin Plate Material

摘要

Drawbead are often used to control the flow of material, stress and deep drawing force in the flange area. This paper discussed the drawbead (fully, not fully and without drawbead) that combined with variations in the blank holder force against restriction of material flow and drawbead restriction force of deep drawing with palm oil lubrication. In this paper, analytical and experiments are used to predict the drawbead restraining and deep drawing force. The tin steel sheet with a thickness of 0.2 mm is used as speciment. The results obtained, that the application fully drawbead be very effective in controlling the flow of materials in the flange, as compared to not fully and without drawbead. In the beginning of the process (punch stroke < 4 mm), the magnitude of restraining force and deep drawing force can be increased. And, the magnitude of Radial Stress increases, conversely the magnitude of tangential stress decreased. This can prevent the occurrence optimum blank holder force is recommended in range 4394-8788 N. Comparisons of results between the analysis and experiments show the phenomenon is similar.