Determination of Optimal Temperature for Defect-free Casting of Aluminium in the LP-LFC Process

摘要

Fluidity of ZL101 aluminium alloys in the low-pressure lost foam casting (LP-LFC) process has been investigated by altering various temperature variables. The experimental results indicate that the LP-LFC process had fine fluidity, and the pouring temperature was lower than conventional lost foam casting. The effect of the metal temperature on the fluidity is marginal in the LP-LFC process. Excessive pouring temperature not only aggrandizes energy consumption but also deteriorates porosity defect. The success of casting cooling fin demonstrates the advantages of LP-EPC process in producing high-complicated castings.