首页> 外文会议>World Conference on Titanium >The Preparation and Properties of Dissimilar Joints between Ti-6Ta and 304L Stainless Steel
【24h】

The Preparation and Properties of Dissimilar Joints between Ti-6Ta and 304L Stainless Steel

机译:Ti-6TA和304L不锈钢之间不同接头的制备与性能

获取原文

摘要

High integrity and corrosion resistant dissimilar joints between Ti-6Ta and 304L stainless steel are necessary. Fusion welding processes produce secondary precipitates which dissolve in nitric acid, and hence solid-state processes are proposed. In this work, Dissimilar joining processes of bra-zing and explosive welding available for producing Ti-6Ta /304L joints with corrosion resistance are highlighted. The possible methods and the microstructural-metallurgical properties of the joints along with corrosion results obtained with corrosion testing are discussed.
机译:需要在Ti-6TA和304L不锈钢之间的高完整性和耐腐蚀不同的关节。熔融焊接工艺产生溶解硝酸的二次沉淀物,因此提出了固态过程。在这项工作中,突出了用于产生具有耐腐蚀性的Ti-6TA / 304L关节的BRA-Zing和爆炸焊接的异种接合过程。讨论了接头的可能的方法和微观结构 - 冶金特性以及通过腐蚀测试获得的腐蚀结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号