HF emissions to the working atmosphere may still be a problem for the aluminium industry. The objective in the present work was to study how the HF evolution is distributed between feeder holes, other openings in the crust, gases diffusing through the crust, fumes from the secondary alumina residing on top of the crust etc. A movable "gas sniffer" connected to a Tunable Diode Laser was used to measure the HF concentrations at the above mentioned locations. The stationary HF level in an open flaming feeder hole was approximately 9000 ppm, when measured a few cm above the bath surface. In comparison, when the probe was positioned 5-10 cm above a crust area with good integrity, the HF concentration was in the range 5-10 ppm. The results support the notion that most of the HF evolves from open feeder holes and the tapping hole.
展开▼
