首页> 外文会议>TMS Annual Meeting Exhibition >CO_2 GASIFICATION OF CATALYSTS-LOADED PETROLEUM COKE AT DIFFERENT GRINDING MEDIUM
【24h】

CO_2 GASIFICATION OF CATALYSTS-LOADED PETROLEUM COKE AT DIFFERENT GRINDING MEDIUM

机译:CO_2在不同研磨介质的催化剂加载的石油焦的气化

获取原文
获取外文期刊封面目录资料

摘要

The gasification reactivity of PC (petroleum coke), strengthened by addition of different potassium carbonate proportions using different grinding medium, was investigated by using thermogravimetric analysis (TGA). Results showed that the gasification reactivity of PC not only increased with the increase of catalyst-loaded, but also showed the effective improvement by anhydrous alcohol. The PC was mixed with potassium carbonate [K_2CO_3] catalyst at 0.5%, 0.8%, 1.0% and 1.5%, and then ground wet with distilled water. The CO_2-gasification rate of PC was only 77.35%, 80.55%, 84.07% and 85.88% under the gasification temperature 1100 °C and holding time 120 min, at different K_2CO_3 respectively. However, when the PC was ground in anhydrous alcohol at the same condition of catalyst-loading, the gasification rate of PC reached 95.43%, 96.63%, 95.50% and 95.61% at the holding time of 108 min, 101 min, 74 min and 35 min, respectively. It was shown by FTIR SEM and EDX determinations that the anhydrous alcohol used as the grinding medium can further improve the gasification reactivity of PC when compared with the distilled water.
机译:通过使用热重分析(TGA)研究了通过添加不同研磨介质的不同碳酸钾比例来加强PC(石油焦炭)的气化反应性。结果表明,PC的气化反应性不仅随着催化剂负载的增加而增加,而且还显示出无水醇的有效改善。将PC与碳酸钾[K_2CO_3]催化剂混合,0.5%,0.8%,1.0%和1.5%,然后用蒸馏水研磨。 PC的CO_2气化速率在1100℃下的气化温度下仅为77.35%,80.55%,84.07%和85.88%,并分别在不同的K_2CO_3处保持时间120分钟。然而,当在催化剂负载条件下将PC接地,PC的气化速率在108分钟的持有时间内达到95.43%,96.63%,95.5.5%和95.61%,101分钟,74分钟35分钟。通过FTIR SEM和EDX测定显示,与蒸馏水相比,用作研磨介质的无水醇可以进一步改善PC的气化反应性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号