Characterization of a prototype SCUBA-2 1280 pixel submillimetre superconducting bolometer array

摘要

We present the results of characterization measurements on a 1280 pixel superconducting bolometer array designed for operation at wavelengths around 450 μm. The array is a prototype for the sub-arrays which will form the focal plane for the SCUBA-2 sub-mm camera, being built for the James Clerk Maxwell Telescope (JCMT) in Hawaii. With over 10 000 pixels in total, it will provide a huge improvement in both sensitivity and mapping speed over existing instruments. The array consists of molybdenum-copper bi-layer TES (transition edge sensor) pixels, bonded to a multiplexer. The detectors operate at a temperature of approximately 175 mK, and require a heat sink at a temperature of approximately 60 mK. In contrast to previous TES arrays, the multiplexing elements are located beneath each pixel (an "in-focal plane" configuration). We present the results of electrical and optical measurements, and show that the optical NEP (noise equivalent power) is less than 1.4 x 10~(-16) W Hz~(-0.5), and thus within the requirement of 2.9 x 10~(-16) W Hz~(-0.5).