首页> 外文会议>ASME turbo expo conference >GT10C - 30 MW GAS TURBINE FOR MECHANICAL DRIVE AND POWER GENERATION
【24h】

GT10C - 30 MW GAS TURBINE FOR MECHANICAL DRIVE AND POWER GENERATION

机译:GT10C - 30兆瓦燃气轮机,用于机械驱动和发电

获取原文

摘要

ALSTOM Power has launched the GT10C a 30 MW industrial gas turbine (see figure 1) upgraded from the 25 MW GT10B. The thermal efficiency of the new gas turbine is 37.3% (shaft) and 36% electrical at ISO inlet conditions with no losses. The new GT10C has a Dry Low Emission (DLE) combustor for both natural gas and diesel oil fuel; it has NOx emissions at 15 ppmv on gas and 42 ppmv on oil fuel (15% O_2 dry). The first GT10C is now manufactured and assembled, and has been under testing since October 2001. For this purpose a new test rig has been built in Finspong, Sweden, in order to verify performance and reliability. GT10C will be available to the market mid- 2002 and manufactured in parallel with GT10B. The general design is based on the GT10B and measures have been taken for maximum reliability and maintenance in order to keep operation costs to a minimum. Improvements for GT10C are mainly derived from GT10B or taken from ALSTOM Power GTX100 (43 MW gas turbine), as described herein.
机译:Alstom Power推出了GT10C A 30 MW工业燃气轮机(见图1)从25 MW GT10B升级。新型燃气轮机的热效率为37.3%(轴)和ISO入口条件下的36%电气,没有损失。新的GT10C具有干燥的低发射(DLE)燃烧器,用于天然气和柴油燃料;它具有15 ppmv的NOx排放,油燃料(15%O_2干)上的42 ppmv。首款GT10C现已制造和组装,并自2001年10月以来一直在测试。为此目的,在瑞典芬明,瑞典内建了一个新的试验室,以验证性能和可靠性。 GT10C将于2002年中期可用,并与GT10B平行制造。一般设计基于GT10B,已经采取了最大可靠性和维护的措施,以便将运营成本保持在最低限度。 GT10C的改进主要来自GT10B或从Alstom Power GTX100(43MW燃气轮机)中获取,如本文所述。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号