ALLOWABLE FLAW SIZE OF JAPANESE CAST STAINLESS STEEL PIPE USING PROBABILISTIC FRACTURE MECHANICS METHOD

摘要

The cast austenitic stainless steel (CASS) that is used for the primary loop pipes of nuclear power plants is susceptible to thermal ageing during plant operation. The Japanese JSME rules on fitness-for-service (JSME rules on FFS) for nuclear power plants specify the allowable flaw depths. However, some of these allowable flaw sizes are small compared with the smallest flaw sizes, which can be detected by nondestructive testing. ASME Section XI Code Case N-838 recently specified the maximum tolerable flaw depths for CASS pipes determined by probabilistic fracture mechanics (PFM). In a similar way, the allowable flaw depths of CASS pipes were calculated by PFM analysis code "PREFACE" which considers uncertainty of the mechanical properties of Japanese PWR CASS materials. In order to confirm the validity of PREFACE, the allowable flaw depths calculated by PREFACE were compared with the maximum tolerable flaw depths in the technical basis of Code Case N-838. As a result, although the J calculation method and the embrittlement prediction model of CASS are different, these were qualitatively consistent. In addition, the sensitivity of ferrite content to the allowable flaw depths was investigated.