首页> 外文会议>International Conference on Quality in Research >ZigBee based wireless sensor networks and performance analysis in various environments
【24h】

ZigBee based wireless sensor networks and performance analysis in various environments

机译:基于ZigBee的无线传感器网络和各种环境的性能分析

获取原文

摘要

To achieve a reliable and robust system for environmental monitoring, there is an available technology that can be used to resolve this problem and moreover provide for better living. Wireless sensor networks (WSN) have been successfully applied in many environmental monitoring. An ad-hoc wireless sensor network consists of a number of small and self-power sensing devices (nodes) connected using effective wireless networks. Compared to wired networks, there are several challenges that must be addressed in wireless networks. These challenges are limitation in communication bandwidth and energy constraint in sensor node, therefore it is important to know their reliability and performance. This paper reports the development and performance analysis of an embedded wireless sensor network for temperature and humidity monitoring in the environment. The network itself consists of a coordinator or data gateway which wirelessly collect temperature and humidity data from several sensor nodes that are responsible to provide those data. Each sensor node is developed from an Arduino based microcontroller, Xbee wireless module based on ZigBee/IEEE 802.15.4 standards, and temperature and humidity sensor devices. The network quality of service (QoS) is investigated in terms of delay, throughput and packet loss as a function of sensor node distance and transmitted packet size over line of sight (LOS) and non-line of sight (NLOS) conditions. The throughput and packet delay are also measured as a function of the baud rate in point to point link. This experiment is performed to have an insight how the baud rate affects the latency of the communication over the ZigBee protocol. Next, we also considered the multi-hop scenario with the presence of router for relaying packets from the sensor node to the coordinator. The performance of multi-hop configuration is compared to that of direct transmission. Based on our analysis, it is concluded that the ZigBee based WSN is more suitable for low data rate applications.
机译:为实现可靠且稳健的环境监测系统,有一种可用的技术可用于解决此问题,而且提供更好的生活。无线传感器网络(WSN)已成功应用于许多环境监测。 Ad-Hoc无线传感器网络由许多使用有效无线网络连接的小型和自功传感设备(节点)组成。与有线网络相比,无线网络中必须解决的几个挑战。这些挑战是传感器节点通信带宽和能量约束的限制,因此了解其可靠性和性能非常重要。本文报道了嵌入式无线传感器网络在环境中温度和湿度监测的开发和性能分析。网络本身由协调器或数据网关组成,该协调器或数据网关从负责提供这些数据的几个传感器节点无线收集温度和湿度数据。每个传感器节点是从基于Arduino的微控制器,基于ZigBee / IEEE 802.15.4标准的XBEE无线模块开发,温度和湿度传感器设备。在延迟,吞吐量和分组损耗方面对服务网络质量(QoS)进行调查,作为传感器节点距离和在视线(LOS)和非视线(NLOS)条件下传输的分组大小。还测量吞吐量和分组延迟作为指向点链路的波特率的函数。执行该实验以了解波特率如何影响ZigBee协议的通信延迟。接下来,我们还考虑了具有路由器的多跳方案,用于将数据包从传感器节点中继到协调器。将多跳配置的性能与直接传输的性能进行了比较。基于我们的分析,得出结论,基于ZigBee的WSN更适合于低数据速率应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号