Improving Wool/Polyester Yarn Quality by Transposal Spinning with Movable Balloon Control Ring

摘要

To improve yarn quality in ring spinning frame, this paper examines transposal spinning with the movable balloon control ring. The lefttransposal spinning and the right-transposal spinning were experimented to spin two yarns; after installing the movable balloon control ring, the two methods were respectively used to spin two other yarns again. All the experiments were on the same ring frame and the raw material was wool/polyester blend roving with a ratio of 30/70. The main quality indexes of the four yarns were tested and analyzed, including hairiness, tensile property, evenness and usual faults. The results show that the yarn spun by the lefttransposal spinning has a better quality than the righttransposal spinning, and after adding the movable balloon control ring, the improvement of yarn hairiness, strength and evenness, as well usual faults, is very obvious. So, in the advantage of transposal spinning, the method of installing the movable balloon control ring can improve some deteriorative problems and make yarn quality better. In addition, the method gives new insight into energy efficiency. The research in this field is on the way and the result is in accord with the Low-carbon Economy.