首页> 外文会议>International Conference on fracture and Damage Mechanics >Real-Time Measurements on Crack-Tip Deformation Fields of LY12 Samples under Impact Tension
【24h】

Real-Time Measurements on Crack-Tip Deformation Fields of LY12 Samples under Impact Tension

机译:Ly12样品下裂纹尖端变形场的实时测量

获取原文

摘要

In this paper, the deformation fields of LY12 crack samples loaded by an SHTB are real-time investigated with the time interval of 10 μs by an optical system, which consists of a high-speed camera, a flash light, a frame grabber and a synchronization device with the delay-time less than microsecond. The cracks are preset by using the three-points bending method in a MTS fatigue machine. The crack is 2mm long with a flare angle of 60 degree. During the experiments, the dynamic deformation images are captured by the high speed camera and analyzed by newly developed software based on Digital Correlation theory. And the displacements fields near crack-tips according to the changes of the flare angle and radius during the impact process are obtained. Experimental results acquired in this paper are proofed, by compared with the theoretical calculations.
机译:在本文中,由SHTB加载的Ly12裂纹样品的变形场是通过光学系统的10μs的时间间隔来实时调查,这包括高速相机,闪光灯,框架抓取器和a同步设备具有延迟时间小于微秒。通过使用MTS疲劳机中的三分弯曲方法预设裂缝。裂缝长2毫米,具有60度的喇叭喇叭。在实验期间,通过高速相机捕获动态变形图像,并通过基于数字相关理论的新开发的软件分析。获得了在冲击过程中根据喇叭形角和半径的变化的裂缝尖端附近的位移场。通过与理论计算相比,本文获得的实验结果是证明的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号