首页> 外文会议>International Conference on Indoor Air Quality and Climate >MEASUREMENT OF THE PERCEIVED ODOUR INTENSITY OF BUILDING MATERIALS WITH MULTI GAS-SENSOR SYSTEMS
【24h】

MEASUREMENT OF THE PERCEIVED ODOUR INTENSITY OF BUILDING MATERIALS WITH MULTI GAS-SENSOR SYSTEMS

机译:用多气体传感器系统测量建筑材料的感知气味强度

获取原文

摘要

In recent years multi gas-sensor systems (electronic noses) have been developed in order to mimic the human sense of smell. These systems comprise of an array of gas sensors with a broad and partly overlapping selectivity, and a data processing unit. At the Hermann-Rietschel-Insitute the multi gas-sensor system "Kamina" of the FZ Karlsruhe is used to determine perceived intensity of odours from building materials. The data processing uses pattern recognition and regression methods to correlate the signals to the perceived intensity of odours measured by a trained human panel. The building materials were placed in ventilated emission chambers (climpaqs). The contaminated exhaust air was assessed by a trained human panel and the emission load was measured by the sensor system. The investigations were done at different concentration levels for each material which was realized by adding pure air to the sample air after the climpaq. The measurements and the parallel assessments of the panel were processed using a principal component regression (PCR) method. The results show good correlations between the perceived intensity and the sensor signals for the investigated materials.
机译:近年来,已经开发了多气体传感器系统(电子鼻子)以模仿人类的气味。这些系统包括具有宽且部分重叠的选择性的气体传感器阵列和数据处理单元。在Hermann-Rietschel - 努力,FZ Karlsruhe的多气体传感器系统“Kamina”用于确定从建筑材料中感知的气味强度。数据处理使用模式识别和回归方法来将信号与培训的人类面板测量的感知的气味强度相关联。将建筑材料置于通风排放室(Chimpaqs)中。通过培训的人面板评估污染的排气,并且通过传感器系统测量发射负荷。对每种材料以不同的浓度水平进行调查,该材料通过在升高后通过向样品空气中添加纯空气来实现。使用主要成分回归(PCR)方法处理面板的测量和并行评估。结果在所研究的材料的感知强度和传感器信号之间显示出良好的相关性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号