首页> 外文会议>International conference on aluminium alloy >A Study on Tapping Viewed from Eco-Machining Technology
【24h】

A Study on Tapping Viewed from Eco-Machining Technology

机译:从生态加工技术攻丝攻丝研究

获取原文
获取外文期刊封面目录资料

摘要

This study deals with machining characteristics of thread tapping (torque, tap, wear, work hardness etc.) The tapping of MMC (aluminum alloy metal matrix composite) with TiN coated forming taps under eco-machining technology operation, where chips are not produced and ejected from the tap flute, was investigated and compared with the characteristics during uncoated tapping. The following results are obtained from this study. 1) The tool life of TiN coated taps was 4 times longer than that of uncoated tap, 2) Threads formed with the TiN coated taps exhibit lower work hardening than those formed with uncoated taps.
机译:本研究涉及螺纹攻丝的加工特性(扭矩,敲击,磨损,工作硬度等)MMC(铝合金金属基质复合材料)与镀锡的技术操作下的镀锡形成水龙头的点击,没有生产芯片和研究了从龙头延伸,并与未涂层攻丝期间的特性进行了研究。从本研究中获得以下结果。 1)锡涂层抽头的刀具寿命比由锡涂覆的水龙头形成的螺旋形成的螺纹的螺纹长度为4倍,表现出低于用未涂覆的水龙头形成的液体硬化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号