【24h】

Special MODEM Used in Industrial Control Network

机译:工业控制网络中使用的特殊调制解调器

获取原文

摘要

A special MODEM is used to realize transparent transmission and direct parallel connection and a new method, 256FSK, is used to modulate signals. Within the transmission band of telephone line, an average transmission rate of 18.9Kbps can be achieved without data compaction. 80C196KB is CPU of the MODEM, data port is the simplest mode, three-line (TXD, RXD, GND) mode. So there is no need to set up carrier wave by the control signal before data sending. Thus all systems using the MODEM can be paralleled directly in the master-slave industrial control system. The MODEM can be used to exchange data in the control network with a range of 1.2Km.
机译:用于实现透明传输和直接并行连接的特殊调制解调器,以及新方法256FSK用于调制信号。在电话线的传输频带内,可以在没有数据压缩的情况下实现18.9kbps的平均传输速率。 80C196KB是调制解调器的CPU,数据端口是最简单的模式,三行(TXD,RXD,GND)模式。因此,在数据发送之前,无需通过控制信号设置载波。因此,使用调制解调器的所有系统都可以直接在主从工业控制系统中并行。调制解调器可用于在控制网络中交换数据,范围为1.2km。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号