首页> 外文会议>International Conference on Advanced Information Networking and Applications >An Intelligent Scan Mechanism for 802.11 Networks by Using Media Independent Information Server (MIIS)
【24h】

An Intelligent Scan Mechanism for 802.11 Networks by Using Media Independent Information Server (MIIS)

机译:使用媒体独立信息服务器(MII),通过媒体独立信息服务器(MII)为802.11网络智能扫描机制

获取原文

摘要

Handover efficiency in wireless and mobile communication networks is an important factor in providing QoS guarantees for real time applications. The 802.11 standard requires a Mobile Node (MN) to scan all the possible channels (11 in the US) to discover available Access Points (AP’s) during a handover. In a given 802.11 cell several channels are expected to be empty. Due to a full scan the MN ends up wasting time scanning empty channels, which results in a high handover delay. This handover delay can be reduced by simple refining the scanning procedure to a limited set of channels, currently being used throughout the network or by the surrounding access points. In this paper we propose to use the Media Independent Information Server (MIIS) to inform the MN of the channel configuration information of the network or the surrounding AP’s. In our scheme the MN acquires channel configuration information from MIIS server and then uses that information to scan a limited set of channels being used by the surrounding access points or through out the network rather than scanning all possible channels resulting in reduced handover delay. We define a parameter NET_CHANNEL_CONFIG which is passed in the query by the MN to the MIIS, so that the MIIS knows which information is being requested by the MN. We also define an Information Element Container IE_CONTAINER_802.11_CHINFO which is used by MIIS to return the requested channel configuration information of the network to the MN. We call our scheme Intelligent Scan.
机译:无线和移动通信网络中的移交效率是为实时应用提供QoS保证的重要因素。 802.11标准需要移动节点(MN)来扫描所有可能的通道(美国11中的11),以在切换期间发现可用的接入点(AP)。在给定的802.11小区中,预计几个通道将是空的。由于完全扫描,MN最终浪费时间扫描空信道,这导致高切换延迟。通过简单地将扫描过程简单地将扫描过程简单地改进到一组通道,目前在整个网络中或周围接入点被围绕的接入点来减少该切换延迟。在本文中,我们建议使用媒体独立信息服务器(MII)通知网络的频道配置信息的MN或周围的AP。在我们的方案中,MN从MIIS服务器获取信道配置信息,然后使用该信息扫描周围接入点或通过网络使用的有限通道集,而不是扫描所有可能的信道导致切换延迟减少。我们定义一个参数net_channel_config,该参数由mn传递到MIIS中的查询,使得MII知道MN的请求是哪个信息。我们还定义了MII使用的信息元素容器IE_Container_802.11_Chinfo以将网络的所请求的信道配置信息返回到MN。我们称我们的计划智能扫描。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号