首页> 外文会议>International symposium on test and measurement >Research on the Principle of Trajectory Correction Look-up Table of Range Correction Fuze
【24h】

Research on the Principle of Trajectory Correction Look-up Table of Range Correction Fuze

机译:范围更正引信轨迹校正查寻轨迹原理研究

获取原文

摘要

Range correction fuze (RCF) comes to being because of interaction between range and precision of the general projectile. The environment sensitive device and damping correction mechanism are mounted inside the fuze for the purpose of controlling the real trajectory of projectile and reducing the range error. Range correction fuze (RCF) are made up of the subsystem of conventional fuze system and the subsystem of range correction, it not only has the function of traditional fuze that warrants ammunition safety and controls ignition, but also has the function of increasing shooting precision through increasing flight resistance of projectile and reducing range. The key component is trajectory sensitive device, which it acquire the trajectory minimum velocity and appear time, and convert into the opening time of brake drag mechanism. This paper presents the principle of trajectory correction look-up table, according to the trajectory identification method based on the minimum velocity of trajectory and appear time. Before launching bomb, the setter computes and forms the brake drag mechanism open-time table according to war field information and shooting elements. After launching bomb, the environment sensitive device in the fuze begins to measure the velocity in the real trajectory. Once the velocity of pill becomes the minimum value, the velocity value and appearing time are sent to the fuze controller. The fuze controller searches in the brake drag mechanism open-time table according to the minimum velocity value and appearing time, and the actual open time of the brake drag mechanism is calculated by linear interpolation. And then, the controller controls the exact opening time of the brake drag mechanism in real-time according to opening time, reach the purpose of range correction. The paper introduced the principle of trajectory correction look-up table and the base of scheme put ,and gave the math model & working flow of the principle of trajectory correction look-up table.
机译:范围更正引信(RCF)是因为普通射弹的范围和精度之间的相互作用。环境敏感装置和阻尼校正机构安装在引信中,以控制射弹和减少范围误差的实际轨迹。范围矫正引信(RCF)由传统引信系统的子系统和范围校正子系统组成,它不仅具有传统引信的功能,可证担保弹药安全性和控制点火,还具有增加拍摄精度的功能增加射弹和降低范围的飞行阻力。关键部件是轨迹敏感装置,它获取轨迹最小速度和看起来时间,并转换为制动拖曳机构的打开时间。本文根据基于轨迹的最小速度和看起来时间的轨迹识别方法,提出了轨迹校正查找表的原理。在发布炸弹之前,Setter根据战地信息和拍摄元件计算并形成制动拖动机制开放式表。发射炸弹后,FIZE中的环境敏感装置开始测量真实轨迹中的速度。一旦药丸的速度变为最小值,就会将速度值和出现时间发送到引信控制器。引信控制器根据最小速度值和出现的时间搜索制动拖动机制开放时间表,并且通过线性插值计算制动拖动机制的实际打开时间。然后,控制器根据打开时间实时地控制制动拖曳机构的精确打开时间,达到范围校正的目的。本文介绍了轨迹校正查找表和方案基础的原理,并给出了轨迹校正查找表原理的数学模型和工作流程。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号