首页> 外文会议>International Measurement Confederation world congress >PULSE DIGITAL TO OPTICAL CONVERTER FOR NUCLEAR ELECTRONICS
【24h】

PULSE DIGITAL TO OPTICAL CONVERTER FOR NUCLEAR ELECTRONICS

机译:核电子脉冲数量到光学转换器

获取原文

摘要

Digital-to-optical converter was developed specially for pile-up and dead-time characterization of nuclear devices, but its application is probably wider. The converter generates 10ns-wide pulses in visible (660nm) range, with 8-bit resolution of the optical power, the data rate is up to 20Ms/s. The output optical pulses are generated by high-luminosity LED diode coupled to the optical fibre. A crucial task of the design is eliminating of influence of the parasitic capacitances in fast switching mode.
机译:数字到光学转换器专为核设备的堆积和死区表征而开发,但其应用可能更广泛。转换器在可见光(660nm)范围内产生10ns的脉冲,其中光功率为8位分辨率,数据速率高达20ms / s。输出光脉冲由耦合到光纤的高亮度LED二极管产生。设计的一个关键任务是消除了寄生电容在快速切换模式中的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号