Measurement of retardance variations over the apertures of liquid crystal variable retarders

摘要

Variations of the induced retardance in the aperture of liquid-crystal variable retarders LCVR and spatial light modulators LC-SLM arc measured. It is found that the induced retardance, in LCVR, shows variations over the aperture which depend on the wavelength of the light used and the voltage applied. Larger retardance variations appear near to the edges of the cell. There are also larger variations in the maximum and minimum unwrapped retardances in the retardance versus voltage curves. These voltage values and the edges positions of the cells should be avoided in applications of these devices. On the other hand, the induced retardance is calculated pixel by pixel in LC-SLM. For the same gray level over the entire LC-SLM screen, there are differences in the induced retardance between pixels located in a central area and pixels located in the edges. For correct calibration of the LC-SLM, the retardance value as a function of gray level was determined, pixel by pixel.