首页> 外文会议>International Seminar on Intelligent Technology and Its Applications >Design and realization multi layer parasitic for gain enhancement of microstrip patch antenna
【24h】

Design and realization multi layer parasitic for gain enhancement of microstrip patch antenna

机译:微带贴片天线增益增强的多层寄生设计与实现

获取原文

摘要

Microstrip antenna has a small gain, bandwidth and efficiency. To overcome those weaknesses, this paper focused on a design of multilayer parasitic substrate for enhancing antenna gain. The distance between first layer parasitic and second layer parasitic had been optimized to maximize electromagnetic coupling and improve antenna main lobe. The microstrip antenna had been fabricated using FR-4 epoxy substrate with 4.2 dielectric constant. Measured antenna acquires unidirectional radiation pattern, 70° beamwidth azimuth, 2.333 GHz-2.377 GHz of operating frequency at VSWR ≤ 2, 44 MHz of bandwidth, and Gain = 4.64 dB. The dimension of realized antenna was 151.5 mm × 151.5 mm. This antenna was purposed to work for LTE band 40 at 2.35 GHz.
机译:微带天线具有较小的增益,带宽和效率。为了克服这些缺点,本文着重于设计用于提高天线增益的多层寄生衬底。优化了第一层寄生与第二层寄生之间的距离,以最大程度地提高电磁耦合并改善天线主瓣。微带天线是使用具有4.2介电常数的FR-4环氧基板制造的。被测天线在VSWR≤2、44 MHz带宽,增益= 4.64 dB时获得单向辐射方向图,70°波束宽度方位角,2.333 GHz-2.377 GHz的工作频率。实际天线的尺寸为151.5 mm×151.5 mm。该天线旨在用于2.35 GHz的LTE频段40。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号