Automated HDRI solves challenge of detecting defects in highly reflective fibers

摘要

A method for handling wide range of reflectance between the core and cladding due to the on-axis inspection lighting reflecting off the distal end of the fiber using high dynamic range (HDR) imaging has been demonstrated using the FastMT software. A set of fibers was imaged using two different exposure levels to create two low dynamic range (LDR) images. These images were combined to form an uncompressed HDR image. Due to current limitation of the bit-depth of the processing, a compression technique was applied to convert the HDR image to an 8-bit range. The resulting detection of defects in both the cladding and core, from a single image acquisition, proves that the method will provide excellent fiber visual pass/fail results. To the best of our knowledge, this is the first fiberscope processing software to employ HDR imaging and processing to handle extreme dynamic range cases. Further development is planned to enable direct processing of the HDR image without the loss in contrast of non-linear compression used in this result. It is anticipated that this improvement will recover at least a factor of two in contrast, making it possible to reliably detect even less visible defects.