首页> 外文会议>International Symposium on Electrodynamic and Mechatronic Systems >Monitoring system of harmful substances emission at Compression Ignition engine with Exhaust Gas Recirculation
【24h】

Monitoring system of harmful substances emission at Compression Ignition engine with Exhaust Gas Recirculation

机译:废气再循环的压燃式发动机有害物质排放监测系统

获取原文

摘要

This paper describes conception of harmful substances emission monitoring system integrated with control system of EGR (Exhaust Gas Recirculation) at off-highway vehicles CI (Compression Ignition) engine. Proposed system based on standard sensors as temperature, rotational speed and also air flow meter sensor. Empirical modeling with consideration of signals of above mentioned sensors allow estimation of harmful substances concentration in exhaust gases. The goal to introduce this monitoring system is to indicate such control of emission reduction system as EGR to achieve advantageous engine emission properties. It is required to collaborate monitoring system with EGR control system equipped with actuator as prototype EGR valve controlled during CAN Bus (Controlled Area Network). Electronically controlled valve has very high precision and recurrence of opening steps what allow to realization of stable operated recirculation system. Besides of this possibility to flexible programming of valve operating mode allow to adapting of valve opening steps to CI engine operating condition changes. Replacement of expensive sensors specialized to measure chosen gas and matter concentration allow to minimizing cost of emission reduction systems applied at combustion engines. Publication included initial test bench research results of estimated exhaust gas and matter concentration. There are also proposed simple rules to application in advanced control algorithm of emission reduction system.
机译:本文介绍了与非公路车辆CI(压缩点火)发动机的EGR(废气再循环)控制系统集成的有害物质排放监测系统的概念。建议的系统基于标准传感器,例如温度,转速以及空气流量计传感器。考虑到上述传感器的信号的经验建模允许估计废气中有害物质的浓度。引入该监控系统的目的是指出对诸如EGR的减排系统的控制,以实现有利的发动机排放特性。需要将监视系统与配备有执行器的EGR控制系统配合使用,作为在CAN总线(受控区域网络)中受控制的原型EGR阀。电控阀具有很高的精度和重复的打开步骤,可实现稳定的再循环系统。除了这种可能性之外,还可以灵活地对气门工作模式进行编程,从而使气门开启步骤适应CI发动机工作条件的变化。更换昂贵的专用于测量选定气体和物质浓度的传感器,可以最大程度地减少内燃机上使用的减排系统的成本。出版物包括估计废气和物质浓度的初始试验台研究结果。还提出了一些简单的规则,可以应用于减排系统的高级控制算法中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号