Analysis of design combine transplanter power by hand tractor: Transmission system and furrow opener

摘要

In the process of designing machine requires a complete component analysis. The planter machine can do soil tillage, give starter fertilizer, Furrow Opener, seed place and furrow closer will be designed. Planter that does such integrated work is called a combine transplanter. This is done to achieve an effective and efficient planting machine. Therefore, an integrated planter machine will be designed using a tractor wheel axle as the driven. The purpose of this study is to analyze the transmission system on the planting tools and furrow opener to be used. The results showed that, transmission system recommended using sprocket-chain system. The number of sprocket teeth from the tractor wheel shaft up to the seed shaft has been obtained with a maximum spacing of 20.19 cm. Metering device fertilizer using edge-cell type with a gap area of 69.44 mm2 followed by cylinder dose of fertilizer. Furrow Opener will use a shoe type with a height of 10 cm, a width of 3 m and a thickness of 0.78 mm.