首页> 外文会议>American Nuclear Society;International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors >CHARACTERIZING AND QUANTIFYING THE AGING OF POLYETHYLENE THIN FILMS USING NOVEL DOPED-FILMS AND GOLD NANOPARTICLE LABELING STRATEGIES TOWARD UNDERSTANDING FAILURE OF CABLING INSULATION
【24h】

CHARACTERIZING AND QUANTIFYING THE AGING OF POLYETHYLENE THIN FILMS USING NOVEL DOPED-FILMS AND GOLD NANOPARTICLE LABELING STRATEGIES TOWARD UNDERSTANDING FAILURE OF CABLING INSULATION

机译:使用新颖的掺杂薄膜和金纳米颗粒标签策略表征和量化聚乙烯薄膜的老化,以了解电缆绝缘的失败

获取原文

摘要

Under environmental driving forces, the polymerbackbone of the cabling insulations undergo oxidation,scission and crosslinking reactions that ultimately lead tochanges in the physical properties of the plastics. The aimof this work is to develop new methods for quantifyingrates and yields of chemical changes within the relevantinsultation polymers and relate these changes to changesin the electrical barrier properties of the materials.Specifically, novel methods were employed forquantifying oxidation and crystallinity within thin filmsrelying on attenuated total reflectance – Fouriertransform infrared spectroscopy (ATR-FTIR). Oxidationwas quantified using doped films as solid-statecalibration standards. The percent crystallinity was alsodetermined by normalization of amorphous andcrystalline IR-stretches. To observe electrical propertychanges, we applied electrochemical impedancespectroscopy with solutions of either gold nanoparticles(4-6 nm diameter) or a gold salt solution. Under theapplied conditions, a drop in impedance was observedand predicted to be the result of Au3+ ion penetration intothe aged films. Combining the ATR-FTIR measurementsof oxidation and crystallinity, along with the impedancemeasurements, we have established a suite of strategiesfor evaluating polymers that will ultimately enable apredictive model for the failure of these plastics asinsulators of electrical cables.
机译:在环境驱动力的作用下,聚合物 电缆绝缘的主干受到氧化, 断裂和交联反应最终导致 改变塑料的物理性能。目的 这项工作的目的是开发新的量化方法 相关范围内化学变化的速率和产率 绝缘聚合物并将这些变化与变化联系起来 材料的电阻挡性能。 具体而言,采用了新颖的方法 量化薄膜中的氧化和结晶度 依靠衰减的全反射率–傅立叶 变换红外光谱(ATR-FTIR)。氧化作用 使用掺杂的薄膜作为固态被量化 校准标准。结晶度百分比也为 由非晶态和 晶体红外拉伸。观察电性能 变化,我们施加了电化学阻抗 两种金纳米颗粒溶液的光谱学 (直径4-6 nm)或金盐溶液。在下面 施加条件下,观察到阻抗下降 并被认为是Au3 +离子渗入的结果 老电影。结合ATR-FTIR测量 氧化和结晶度以及阻抗 测量,我们建立了一套策略 用于评估最终将使 这些塑料失效的预测模型如下: 电缆的绝缘体。

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号