Electromagnetic finite element analysis of electrical steels combinations in lamination core steps of single-phase distribution transformers

摘要

This paper presents an electromagnetic finite element (FE) analysis of combinations of electrical steels in the lamination core steps of a real 6.3 MVA single-phase distribution transformer. The magnetic core of this transformer has a cruciform cross-section with lamination core steps. Two electrical steels are combined in the lamination core steps of transformer: a convectional grain oriented electrical steel (M-5) and laser-scribed electrical steel (23ZDKH90). 3-D FE simulations are performed to calculate the core losses (no-load losses) without and with combinations of electrical steels. B-H curves and iron loss curves of electrical steels are taken into account in the numerical simulations. The core loss calculated in FE simulation without combination of steels is compared with the core loss measured in no-load laboratory tests. Numerical results show that the combination of electrical steels in the lamination core steps can reduce 5% the core losses in single-phase distribution transformers with stacked magnetic cores. Finally, material costs are estimated for the steel combinations in the magnetic core of transformer.