首页> 外文会议>International Workshop on Antenna Technology >Planar bent-cross-shaped metaline antenna for circularly polarized reconfigurable radiation
【24h】

Planar bent-cross-shaped metaline antenna for circularly polarized reconfigurable radiation

机译:平面弯曲十字形金属天线,用于圆极化可重构辐射

获取原文

摘要

A planar antenna consisting of four bent arms on a thin dielectric substrate is investigated. The arms are located symmetrically with respect to the coordinate origin, and each is made of a circularly polarized (CP) metaline that shows a negative propagation phase constant at the design frequency (2.45 GHz). The antenna height is extremely small: approximately 0.03 wavelength. By changing the feed point, the antenna can be made to radiate a CP wave in each of the four orthogonal directions of the azimuth plane. The VSWR is less than 2. Mutual coupling between the four arms is small (less than -30 dB).
机译:研究了在薄电介质基板上由四个弯曲臂组成的平面天线。这些臂相对于坐标原点对称放置,并且每个臂均由圆极化(CP)的金属盐制成,该金属盐在设计频率(2.45 GHz)处显示出负的传播相位常数。天线高度非常小:大约为0.03波长。通过改变馈电点,可以使天线在方位平面的四个正交方向的每个方向上辐射CP波。 VSWR小于2。四个臂之间的相互耦合很小(小于-30 dB)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号