首页> 外文会议>International Conference on Solid State Lighting and Led-based Illumination Systems >A spectral measurement method for determining white OLED average junction temperatures
【24h】

A spectral measurement method for determining white OLED average junction temperatures

机译:确定白色OLED平均结温的光谱测量方法

获取原文

摘要

The objective of this study was to investigate an indirect method of measuring the average junction temperature of a white organic light-emitting diode (OLED) based on temperature sensitivity differences in the radiant power emitted by individual emitter materials (i.e., "blue," "green," and "red"). The measured spectral power distributions (SPDs) of the white OLED as a function of temperature showed amplitude decrease as a function of temperature in the different spectral bands, red, green, and blue. Analyzed data showed a good linear correlation between the integrated radiance for each spectral band and the OLED panel temperature, measured at a reference point on the back surface of the panel. The integrated radiance ratio of the spectral band green compared to red, (G/R), correlates linearly with panel temperature. Assuming that the panel reference point temperature is proportional to the average junction temperature of the OLED panel, the G/R ratio can be used for estimating the average junction temperature of an OLED panel.
机译:这项研究的目的是研究一种间接方法,该方法基于各个发射体材料(即“蓝色”,“绿色”和“红色”)。白色OLED的测量光谱功率分布(SPD)作为温度的函数显示出在红色,绿色和蓝色不同光谱带中幅度随温度的变化而减小。分析数据显示,每个光谱带的积分辐射度与OLED面板温度之间具有良好的线性相关性,该温度是在面板背面的参考点处测得的。绿色与红色的光谱带的积分辐射比(G / R)与面板温度成线性关系。假设面板参考点温度与OLED面板的平均结温成正比,则G / R比可用于估计OLED面板的平均结温。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号