首页> 外文会议>ASME international mechanical engineering congress and exposition >SIMPLE HEAT TRANSFER EXPERIMENT TO EVALUATE THE SOLID/LIQUID PHASE CHANGE THERMAL ENERGY STORAGE SYSTEM
【24h】

SIMPLE HEAT TRANSFER EXPERIMENT TO EVALUATE THE SOLID/LIQUID PHASE CHANGE THERMAL ENERGY STORAGE SYSTEM

机译:简单的传热实验以评估固体/液体相变热能存储系统

获取原文

摘要

A detailed experimental freezing study, designed for undergraduate students, has been carried out to evaluate the heat transfer performance of a solid/liquid phase-change thermal energy storage system. The test vessel system, experimental procedure and results, and analytical solutions are discussed. The phase-change material (PCM) is contained in a vertically oriented test cylinder that is cooled at its outside boundary, resulting in radially inward freezing. Detailed quantitative time-dependent volumetric temperature distributions and freeze-front motion and shape data were experimentally obtained. To fully understand the behavior of the eicosane, four freezing tests were performed with different temperature set points as low as 10°C. In the analysis, results of a test in which molten eicosane, initially at 50°C, was solidified and brought to a final temperature of 10°C are presented. In the freezing case study, a mathematical model based on a one-dimensional analysis, which considered heat conduction as the only mode of heat transfer was developed. The phase-change medium, 99% pure eicosane (C_(20)H_(42)) was chosen as the PCM. Eicosane is desirable because its fusion temperature is just slightly higher than ambient temperature (36.5°C), which is convenient for phase-change experimentation. Low-temperature heating can be used to melt the PCM and ambient-temperature cooling can be used to re-freeze it. To evaluate the inward radius of fusion, several analytical and experimental approaches were considered. These approaches were (1) experimental method; (2) conduction model; (3) integral method; and (4) cumulative heat transfer method. Comparison of these methods reveals excellent agreement. In most cases, the heat transfer estimated from the freezing-front analysis was slightly higher than the heat transfer evaluated from the time-series data. The largest discrepancy occurs at fifty minutes into the experiment (10.7%).
机译:已针对本科生设计了详细的实验冻结研究,以评估固/液相变热能存储系统的传热性能。讨论了测试容器系统,实验程序和结果以及分析解决方案。相变材料(PCM)包含在垂直定向的测试气缸中,该气缸在其外边界处冷却,从而导致径向向内冻结。通过实验获得了详细的随时间变化的体积温度分布以及冻结前运动和形状数据。为了完全理解二十烷的行为,在低至10°C的不同温度设定点下进行了四个冷冻测试。在分析中,给出了测试结果,在该测试中,熔融的二十烷在开始时为50°C固化,并达到了10°C的最终温度。在冻结案例研究中,开发了基于一维分析的数学模型,该模型将热传导视为唯一的热传递方式。选择相变介质99%纯正二十烷(C_(20)H_(42))作为PCM。二十烷是合乎需要的,因为其熔融温度仅略高于环境温度(36.5°C),这对于相变实验很方便。可以使用低温加热来熔化PCM,而可以使用环境温度冷却来重新冻结它。为了评估融合的向内半径,考虑了几种分析和实验方法。这些方法是(1)实验方法; (2)传导模型; (3)积分法; (4)累积传热法。这些方法的比较显示出极好的一致性。在大多数情况下,从冻结前沿分析估计的热传递略高于从时间序列数据评估的热传递。最大的差异发生在实验开始后的50分钟(10.7%)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号