首页> 外文会议>IEEE Transportation Electrification Conference and Expo >Design and Evaluation of SiC Active Soft-Switching Cell for 1-ph/3-ph Universal Voltage Input PFC for On-Board Charger Applications
【24h】

Design and Evaluation of SiC Active Soft-Switching Cell for 1-ph/3-ph Universal Voltage Input PFC for On-Board Charger Applications

机译:用于1-pH / 3-pH通用电压输入PFC的SiC有源软开关的设计与评价,用于车载充电器应用

获取原文

摘要

A detailed analysis and experimental evaluation of a continuous-conduction-mode (CCM), pulse-width-modulated (PWM), boost-type active soft-switching cell suitable for 1-ph/3-ph universal-voltage-input PFC for on-board charging (OBC) applications is introduced. The soft-switching cell features zero-voltage switching (ZVS) of all switches, reduced reverse-recovery loss at any operating point, and simple control. The cell achieves high efficiency for converting low line voltage to the high dc-link voltage required for the OBC dc-dc converter. The evaluation of the concept was performed on a single-phase leg 3.4 kW prototype designed to operate at 220 VRMSline input and deliver 650 V output. The prototype achieves 97.8% efficiency at full load and 100 kHz switching frequency. The soft-switching PFC rectifier concept naturally morphs between an interleaved totem-pole converter for 1-ph ac line voltage and a 3-ph converter for 3-ph ac line voltage.
机译:连续导通模式(CCM),脉冲宽度调制(PWM),升压式有源开关单元,适用于1-pH / 3-pH通用电压输入PFC的详细分析和实验评价介绍了在板上的充电(OBC)应用程序。软开关单元具有零电压切换(ZVS)的所有开关,在任何操作点处减少反回恢复损耗,并简单控制。该电池能够将低线电压转换为OBC DC-DC转换器所需的高DC链路电压的高效率。对概念的评估是在单相3.4 kW原型上进行的,旨在以220 V运行 rms 线路输入并提供650 V输出。原型在满载和100 kHz开关频率下实现了97.8%的效率。软切换PFC整流器概念自然变形,用于1-pHAC线电压的交错图腾转换器和3-pH转换器,用于3-pH交流线电压。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号