首页> 外文会议>ASME international mechanical engineering congress and exposition >40-MHZ MICROMACHINED PMN-PT COMPOSITE ULTRASOUND ARRAY FOR MEDICAL IMAGING
【24h】

40-MHZ MICROMACHINED PMN-PT COMPOSITE ULTRASOUND ARRAY FOR MEDICAL IMAGING

机译:用于医学成像的40-MHZ微机械PMN-PT复合超声阵列

获取原文

摘要

Ultrasonography is well known as a relatively low cost and non-invasive modality for real-time imaging. In recent years, various high frequency array transducers have been developed and used for ophthalmology, dermatology, and small animal studies. This paper reports the development of a 48-element 40-MHz ultrasonic array using micromachined lead magnesium niobate-lead titanate (PMN-PT) single crystal 1-3 composite material. Array elements with a pitch of 100-micron were interconnected via a customized flexible circuit. Pulse-echo test showed an average center frequency of 40 MHz and a -6 dB fractional bandwidth of 52%. The -20 dB pulse length was evaluated as 120 ns. The electrical and acoustical separation showed the crosstalk less than - 24 dB. An image of a steel wire target phantom was acquired by stacking multiple A-lines. The results demonstrate resolutions exceeding 70 μm axially and 800 μm laterally. Those results imply the great potential of the developed array transducer for the high frequency medical imaging.
机译:超声检查是众所周知的相对便宜且实时成像的非侵入性方式。近年来,已经开发了各种高频阵列换能器,并将其用于眼科,皮肤病学和小动物研究。本文报道了使用微机械加工的铌酸镁镁-钛酸铅(PMN-PT)单晶1-3复合材料开发的具有48个元素的40-MHz超声阵列的开发。间距为100微米的阵列元件通过定制的柔性电路互连。脉冲回波测试显示平均中心频率为40 MHz,-6 dB的分数带宽为52%。 -20 dB脉冲长度评估为120 ns。电气和声学隔离表明串扰小于-24 dB。通过堆叠多条A线获取钢丝目标体模的图像。结果表明,轴向分辨率超过70μm,横向分辨率超过800μm。这些结果暗示了开发的阵列换能器在高频医学成像中的巨大潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号