首页> 外文会议>Annual Technical Conference and Exhibition >Effect of Large Capillary Pressure on Fluid Flow and Transport in Stress-sensitive Tight Oil Reservoirs
【24h】

Effect of Large Capillary Pressure on Fluid Flow and Transport in Stress-sensitive Tight Oil Reservoirs

机译:大毛细管压力对应力敏感紧油储层流体流动和运输的影响

获取原文

摘要

The pore sizes of unconventional reservoir rock, such as shale and tight rock, are on the order of nanometers. The thermodynamic properties of in-situ hydrocarbon mixtures in such small pores are significantly different from those of fluids in bulk size, primarily due to effect of large capillary pressure. For example, it has been recognized that the phase envelop shifts and bubble-point pressure is suppressed in tight and shale oil reservoirs. On the other hand, the stress-dependency is pronounced in low permeability rocks. It has been observed that pore sizes, especially the sizes of pore-throats, are subject to decrease due to rock deformation induced by the fluid depletion from over-pressurized tight and shale reservoirs. This reduction on pore spaces again affects the capillary pressure and therefore thermodynamic properties of reservoir fluids. Thus it is necessary to model the effect of stress-dependent capillary pressure and rock deformation on tight and shale reservoirs. In this paper, we propose and develop a multiphase, multidimensional compositional reservoir model to capture the effect of large capillary pressure on flow and transport in stress-sensitive unconventional reservoirs. The vapor-liquid equilibrium (VLE) calculation is performed with Peng-Robinson Equation of State (EOS), including the impact of capillary pressure on phase behavior and thermodynamic properties. The fluid flow is fully coupled with geomechanical model, which is derived from the thermo-poroelasticity theory; mean normal stress as the stress variable is solved simultaneously with mass conservation equations. The finite-volume based numerical method, integrated finite difference method, is used for space discretization for both mass conservation and stress equations. The formulations are solved fully implicitly to assure the stability. We use Eagle Ford tight oil formations as an example to demonstrate the effect of capillary pressure on VLE. It shows that the bubble-point pressure is suppressed within nano-pores, and fluid properties, such as oil density and viscosity, are influenced by the suppression due to more light components remained in liquid phase. In order to illustrate the effect of stress-dependent capillary pressure on tight oil flow and production, we perform numerical studies on Bakken tight oil reservoirs. The simulation results show that bubble-point suppression is exaggerated by effects of rock deformation, and capillary pressure on VLE also affects the reservoir pressure and effective stress. Therefore the interactive effects between capillary pressure and rock deformation are observed in numerical results. Finally, the production performance in the simulation examples demonstrates the large effect of large capillary pressure on estimated ultimate recovery (EUR) in stress-sensitive tight reservoirs.
机译:非传统水库岩石(如页岩和紧岩)的孔径为纳米。在这种小孔中原位烃混合物的热力学性质与散装尺寸的流体显着不同,主要是由于大毛细管压力的影响。例如,已经认识到,在紧密和页岩油储存器中抑制了相包围偏移和气泡点压力。另一方面,低渗透岩石中的应力依赖性被发音。已经观察到孔径尺寸,特别是孔隙尺寸的尺寸,由于通过来自过加压的紧密和页岩储存器的流体耗尽引起的岩石变形而受到降低。这种对孔隙的减少再次影响毛细管压力,从力学性质的热力学性能。因此,有必要模拟应力依赖性毛细压力和岩石变形对紧密和页岩储层的影响。在本文中,我们提出并开发了多相,多维成分储层模型,以捕获大毛细管压力对压力敏感的非传统水库的流量和运输的影响。汽液平衡(VLE)计算与状态(EOS)的鹏罗宾逊方程进行,包括毛细管压力对相行为和热力学性能的影响。流体流量完全与地质力学模型完全耦合,该模型源自热孔弹性理论;随着应力变量与质量保护方程同时求解时,平均正常应力。基于有限量的数值方法,集成有限差分法用于质量保护和应力方程的空间离散化。制剂完全隐含地解决以确保稳定性。我们使用Eagle Ford紧密油部作为示例,以证明毛细管压力对VLE的影响。结果表明,在纳米孔内抑制了气泡点压力,并且由于在液相中仍然存在的轻质组分而受到抑制的抑制的流体性质。为了说明应力依赖性毛细管压力对紧密的油流量和生产的影响,我们对Bakken紧密油藏进行了数值研究。仿真结果表明,通过岩石变形的影响夸大了气泡点抑制,并且对VLE的毛细管压力也影响了储层压力和有效应力。因此,在数值结果中观察到毛细管压力和岩石变形之间的互动效果。最后,模拟实施例中的生产性能证明了大毛细管压力对应力敏感的紧密水库估计的终极回收(EUR)的大量影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号