首页> 外文会议>ASME international mechanical engineering congress and exposition >A STUDY OF FORMATION OF CIRCULATION PATTERNS IN LAMINAR UNSTEADY LID-DRIVEN CAVITY FLOWS USING PIV MEASUREMENT TECHNIQUES
【24h】

A STUDY OF FORMATION OF CIRCULATION PATTERNS IN LAMINAR UNSTEADY LID-DRIVEN CAVITY FLOWS USING PIV MEASUREMENT TECHNIQUES

机译:利用PIV测量技术研究层流非定常盖驱动腔流中循环模式的形成

获取原文

摘要

An experimental study was conducted to observe/visualize, the formation of circulation patterns inside a square cavity due to the movement of a lid at constant velocity. Lid driven cavity flow is one of the benchmark studies used in the verification/improvement of CFD codes for internal flow applications/predictions. Previous work on this topic is primarily focused on improving the steady state predictions of the CFD codes using different numerical schemes and algorithms. Furthermore, almost all of the studies reported in computational fluid mechanics literature relates to steady state predictions of lid or shear driven flows. Experimental work that is reported in these studies is limited in scope and number. This paper reports on the measurements we made using Particle Image Velocimeter (PIV) technique to determine the flow field as it develops from stagnation to steady state inside a square cavity driven by a lid. For this purpose, we employed a 2-D PIV system, which uses a double-cavity, Nd:Yag laser to illuminate the test cavity. Experiments were conducted using water as the working fluid inside a square cavity that is one inch (25.4 mm) high and one inch wide. The depth of the cavity is five inches (127 mm) to ensure two-dimensional circulations patterns. Hollow glass sphere particles with 10 microns in diameter were used as seeding of the working fluid, water. Experiments were repeated for different lid velocities corresponding to lid Reynolds numbers (laminar to beginning of transition of turbulence.) Velocity fields were captured during the development of the circulations patters each being unique for the time of the measurement and value of the lid velocity. The center of the circulation pattern and its path inside the cavity is constructed from the captured images as steady state is attained. Also, the strength of the circulation (as manifested by the increase in the diameter of the circulation) is determined at different times for different Reynolds numbers.
机译:进行了一项实验研究,以观察/可视化由于盖子以恒定速度运动而在方腔内形成的循环模式。盖驱动型腔流动是用于内部流动应用/预测的CFD代码验证/改进中使用的基准研究之一。有关该主题的先前工作主要集中在使用不同的数值方案和算法来改进CFD代码的稳态预测。此外,计算流体力学文献中报道的几乎所有研究都涉及盖子或剪切驱动流的稳态预测。这些研究中报道的实验工作在范围和数量上都是有限的。本文报道了我们使用粒子图像测速仪(PIV)技术进行的测量,以确定在由盖驱动的方腔内从停滞发展到稳态时的流场。为此,我们采用了二维PIV系统,该系统使用双腔Nd:Yag激光照亮测试腔。使用水作为高1英寸(25.4毫米)和1英寸宽的方腔内的工作流体进行实验。腔的深度为五英寸(127毫米),以确保二维循环模式。使用直径为10微米的中空玻璃球颗粒作为工作液水的晶种。重复了与盖雷诺数(层流到湍流过渡开始)相对应的不同盖速度的实验。在循环模式发展过程中捕获了速度场,每个速度场在测量时间和盖速度值上都是唯一的。当达到稳定状态时,从捕获的图像中构造出循环模式的中心及其在腔体内的路径。同样,对于不同的雷诺数,在不同的时间确定循环的强度(通过循环直径的增加来证明)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号