首页> 外文会议>International conference on chemical engineering, metallurgical engineering and metallic materials >High temperature deformation behavior and corrosion resistance of 2205 duplex stainless steel under strain rate of 0.5s-1
【24h】

High temperature deformation behavior and corrosion resistance of 2205 duplex stainless steel under strain rate of 0.5s-1

机译:0.5s-1应变速率下2205双相不锈钢的高温变形行为和耐蚀性

获取原文

摘要

Under strain rate of 0.5s-1,the effect of deformation temperature on flow stress,microstructure and corrosion resistance of 2205 duplex stainless steel (DSS) was investigated.The dynamic recrystallization (DRX) of austenite phase was enhanced with the deformation temperature increasing from 850°C to 1050°C,meanwhile,the leading deformation mechanism changed from work hardening to DRX.When the deformation temperature was further increased to 1250°C,the dynamic recovery (DRV) of ferrite phase played a leading role.The specimen after deformation at 1050°C exhibited better DRX behavior,which leads to more γ/γ grain boundaries and δ/γ,boundaries formation,increasing the occurrence of pitting corrosion,and it presented best corrosion resistance at 950°C.
机译:在0.5s-1的应变速率下,研究了变形温度对2205双相不锈钢(DSS)的流动应力,组织和耐蚀性的影响。随着变形温度的升高,奥氏体相的动态再结晶(DRX)增强。在850°C至1050°C的同时,主要的变形机理从加工硬化转变为DRX。当变形温度进一步提高到1250°C时,铁素体相的动态回复率(DRV)发挥了主导作用。 1050°C时的变形表现出更好的DRX性能,导致更多的γ/γ晶界和δ/γ,边界形成,增加点蚀的发生,并且在950°C时表现出最佳的耐蚀性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号