首页> 外文会议>PVP2011;ASME Pressure Vessels and Piping conference >COMPARISON OF CREEP-FATIGUE EVALUATION METHODS WITH NOTCHED SPECIMENS MADE OF MOD.9CR-1MO STEEL
【24h】

COMPARISON OF CREEP-FATIGUE EVALUATION METHODS WITH NOTCHED SPECIMENS MADE OF MOD.9CR-1MO STEEL

机译:蠕变疲劳评估方法与MOD.9CR-1MO钢制成的缺口试样的比较

获取原文

摘要

In a component design at elevated temperature, creep-fatigue is one of the most important failure modes, and assessment of creep-fatigue life in structural discontinuity is important issue to evaluate structural integrity of the components. Therefore a lot of creep-fatigue life evaluation methods were proposed until now. To compare and assess these evaluation methods, a series of creep-fatigue tests was carried out with notched specimens. All the specimens were made of Mod.9Cr-1Mo steel, which it is a candidate material for a primary and secondary heat transport system components of JSFR (Japan Sodium-cooled Fast Reactor). Mechanical creep-fatigue tests and thermal creep-fatigue tests were performed by using conventional uni-axial push-pull fatigue test machine and thermal gradient generating system with an induction heating coil. Stress concentration levels were adjusted by varying the diameters of notch roots in the both tests. In the test, creep-fatigue lives, crack initiation and propagation processes were observed by digital micro-scope and replica method. Besides those, a series of elastic Finite Element Analysis (FEA) were carried out to predict the number of cycles to failure by several creep-fatigue life evaluation methods. Then these predictions were compared with test results. Several types of evaluation methods which are stress redistribution locus (SRL) method, simple elastic follow-up method and the methods described in JSME FR(Fast Reactor) code were applied. The applicability and conservativeness of these methods were discussed. It was appeared that SRL method gave rational prediction of creep-fatigue life with conservativeness when the factor of k=1.6 was applied for all the conditions tested in this study. Comparison of SRL method and simple elastic follow-up method indicated that SRL method applied factor of k=1.6 gave the smallest creep-fatigue life in practicable stress level. JSME FR code gave an evaluation 70~100 times conservative lives comparing with the test results.
机译:在高温下的零件设计中,蠕变疲劳是最重要的破坏模式之一,而评估结构不连续性中的蠕变疲劳寿命是评估零件结构完整性的重要问题。因此,迄今为止提出了许多蠕变疲劳寿命评估方法。为了比较和评估这些评估方法,对带有缺口的样品进行了一系列蠕变疲劳试验。所有样品均由Mod.9Cr-1Mo钢制成,它是JSFR(日本钠冷快堆)的一次和二次热传输系统组件的候选材料。机械蠕变疲劳试验和热蠕变疲劳试验是通过使用常规的单轴推挽疲劳试验机和带有感应加热线圈的热梯度生成系统进行的。在两个试验中,通过改变缺口根的直径来调节应力集中水平。在测试中,通过数字显微镜和复制法观察了蠕变疲劳寿命,裂纹萌生和扩展过程。除此之外,还进行了一系列弹性有限元分析(FEA),以通过几种蠕变疲劳寿命评估方法来预测失效的次数。然后将这些预测与测试结果进行比较。应用了几种类型的评估方法,即应力再分布轨迹(SRL)方法,简单弹性跟踪方法和JSME FR(快速反应堆)代码中描述的方法。讨论了这些方法的适用性和保守性。当在本研究中测试的所有条件下均采用k = 1.6的系数时,SRL方法似乎可以保守地合理预测蠕变疲劳寿命。 SRL方法和简单弹性跟踪方法的比较表明,在可行的应力水平下,SRL方法的应用因子k = 1.6给出了最小的蠕变疲劳寿命。与测试结果相比,JSME FR代码对保守寿命的评估为70〜100倍。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号