首页> 外文会议>International conference on mechanical and electronics engineering >Application of C4D Technique to Void Fraction Measurement of Gas-Liquid Two-Phase Flow: Stratified Flow
【24h】

Application of C4D Technique to Void Fraction Measurement of Gas-Liquid Two-Phase Flow: Stratified Flow

机译:C4D技术在气液两相流空隙率测量中的应用

获取原文

摘要

The feasibility of applying C4D technique to void fraction measurement of gas-liquid two-phase flow is investigated in this paper. As a preliminary research, void fraction measurement under stratified flow is studied. Conductance of two-phase fluid are obtained by a new C4D sensor, and then used to measure the void fraction in 15mm i.d. pipe. An empirical correlation between void fraction and normalized conductance is developed. Thus, the void fraction can be determined by this empirical correlation with the obtained conductance. The experiment results show that applying C4D technique to the void fraction measurement of gas-liquid twophase flow is feasible. The measurement results of void fraction are satisfactory, and the maximum absolute error of void fraction is less than 0.03.
机译:研究了将C4D技术应用于气液两相流空隙率测量的可行性。作为一项初步研究,研究了分层流下孔隙率的测量。通过新型C4D传感器获得两相流体的电导率,然后将其用于测量15mm i.d.中的空隙率。管道。在空隙率和标准化电导之间建立了经验相关性。因此,可以通过与获得的电导的经验相关性来确定空隙率。实验结果表明,将C4D技术应用于气液两相流孔隙率测量是可行的。空隙率的测量结果令人满意,空隙率的最大绝对误差小于0.03。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号