A NEW MICRO TURBO-MACHINERY TEST FACILITY

摘要

The design and construction of a new test facility of micro turbo-machinery are presented for micro centrifugal compressors and radial turbines. The bed can be used for the full speed compressor test and the long duration hot turbine test. In order to adjust the testing condition rapidly, all the regulations of operating state are completed automatically by the control system. The test bed can be used for testing impeller performance with a series of diameter from 55 to 180 mm as a result of the modular design. A thermal protection system is designed to avoid the heat distortion caused by the high inlet temperature of turbine which may exceeds HOOK and provide a proper experimental environment for the electronic components. A photoelectric torque transducer with an accuracy of 1% is designed to measure the torque of a rigid shaft at a high speed over 120000rpm, and the maximum shaft torque is 7.7 N-m. The pressure and temperature are measured by pressure probes and thermocouples. The dynamic pressure signal of the centrifugal compressor is monitored by dynamic pressure sensors. The V-cone pressure-difference mass-flow meters are used for measuring mass-flow. The maximum rotating speed is 125000rpm, and the mass flow adjusted by the electric control valves varies from 0.1 to 1.0 kg/sec. The maximum inlet total temperature of the turbine is 1180K.