首页> 外文会议>World conference on timber engineering;WCTE 2010 >NON-DESTRUCTIVE EVALUATION OF FINGER-JOINT STRENGTH USING AN ON-LINE X-RAY SCANNER
【24h】

NON-DESTRUCTIVE EVALUATION OF FINGER-JOINT STRENGTH USING AN ON-LINE X-RAY SCANNER

机译:在线X射线扫描仪对指接强度的无损评估

获取原文

摘要

Current quality control techniques used in finger-joint mills are neither reliable nor cost effective, due to their destructive nature. Appropriate non-destructive testing (NDT) techniques would provide a better solution. In 2007, FPInnovations-Forintek Division developed an X-ray-based scanning technique to determine finger-joint strength non-destructively, using a computed tomography (CT) X-ray scanner originally designed for medical use. However, it was found that these CT X-ray
机译:由于其破坏性,目前在指接式铣削机中使用的质量控制技术既不可靠也不具有成本效益。适当的无损检测(NDT)技术将提供更好的解决方案。在2007年,FPInnovations-Forintek部门开发了一种基于X射线的扫描技术,该技术使用最初设计用于医疗用途的计算机断层扫描(CT)X射线扫描仪来无损地确定手指关节的强度。但是,发现这些CT X射线

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号