compression Molding; Sheet Molding compound; fiber suspensions; fiber jamming; fiber-matrix separation;
机译:由多层纤维复合材料的实验模量确定纤维-基体相间模量
机译:基于直接纤维模拟的模压成型中肋骨填充中纤维-基体分离的模拟预测
机译:在包含圆柱的狭缝通道中的浓缩悬浮液中,流动引起的纤维取向和浓度分布的实验研究
机译:纤维 - 基质分离和纤维密度分布在纤维悬架中的实验研究
机译:从纤维-基质界面和纤维-基质粘结的角度对纤维复合材料进行数值研究。
机译:纤维板上的应变测量。第一部分:垂直于板平面加载的中密度纤维板(MDF)中的不均匀应变分布
机译:研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求,测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是,在这项研究中,掺入钢纤维对耐火性的影响。实验结果表明,耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时,80-100MPa的设计强度为35MPa或高性能混凝土(HPC)的正常强度混凝土(NSC)不会击落。然而,当HPC含有1体积的钢纤维的百分比时,爆炸性剥落发生在300℃。超高性能混凝土(UHPC)的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
机译:管内浓缩悬浮液的流变学:III。具有相同纤维长度分布的悬浮液