首页> 外文会议>2010 International Conference on Wireless Communications and Signal Processing >A simulated method of modeling wireless channel based on CDL
【24h】

A simulated method of modeling wireless channel based on CDL

机译:基于CDL的无线信道建模的仿真方法

获取原文

摘要

Rapid development of wireless communications gives prominence to simulation. Simulated methods of modeling wireless channel are of significance to wireless communications simulation on both link and system levels. There have been quite a lot of theoretical models which have accurately described the characteristics of wireless channel. However when it comes to the realization of wireless channel in simulation, there seem no accurate enough methods and conclusions. Current simulated methods are mostly built up based on TDL, which is a common framework to model micro fading and mainly focused on micro fading. As to macro fading, Doppler-effect and polarization of electromagnetic wave, this method behaves not well enough, and other statistical approximations is indispensable, such as shadow fading, Doppler power spectrum density and so on. To the question existed, this paper proposes a simulated method to accurately model wireless channel under given wireless environment, on the basis of cluster delay line. This method is highlighted with comprehensive consideration of macro and micro fading, Doppler, multi-path and polarization effect. Analysis and simulation results on characteristics of wireless channel such as signal envelope, coherent time and bandwidth, validate the proposed model.
机译:无线通信的快速发展使仿真成为重要问题。模拟无线信道的方法对于链路和系统级别的无线通信仿真都具有重要意义。已经有很多理论模型可以准确地描述无线信道的特征。但是,在仿真中实现无线信道时,似乎没有足够准确的方法和结论。当前的仿真方法主要是基于TDL建立的,TDL是建模微衰落的通用框架,主要侧重于微衰落。对于宏衰落,电磁波的多普勒效应和极化,这种方法的表现还不够好,其他统计近似也是必不可少的,例如阴影衰落,多普勒功率谱密度等。针对存在的问题,本文提出了一种基于集群延迟线的,在给定无线环境下对无线信道进行准确建模的仿真方法。充分考虑了宏和微衰落,多普勒,多径和极化效应,突出了该方法。通过对无线信道特性(如信号包络,相干时间和带宽)的分析和仿真结果,验证了该模型的正确性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号