首页> 外文会议>2010 International Conference on Mechanic Automation and Control Engineering >Effect of different hot-pressing technology on mechanical properties of binderless particleboard from kenaf core
【24h】

Effect of different hot-pressing technology on mechanical properties of binderless particleboard from kenaf core

机译:不同热压工艺对洋麻芯无胶刨花板力学性能的影响

获取原文

摘要

Binderless particleboard from kenaf core was prepared by steam-injection hot pressing technology and conventional hot pressing technology respectively, and temperature variations of mat core layer was tested by thermocouple during hot-pressing process, density profile of binderless particleboard was tested by isotopic density tester, the effect of two different hot-pressing technology on mechanical properties of binderless particleboard from kenaf core was studied. During conventional hot pressing cross-section temperature distribution of mat was not uniform, and density profile of binderless particleboard was also not uniform, so mechanical properties of binderless particleboard was poor; But during steam-injection hot pressing cross-section temperature distribution of mat was more uniform, and density profile of binderless particleboard was also more uniform, at the same time, because of pretreatment effect of saturated steam on kenaf core, mechanical properties of binderless particleboard was improved greatly.
机译:分别采用蒸汽喷射热压技术和常规热压技术制备洋麻芯无粘结剂刨花板,热压过程中通过热电偶测试垫芯层的温度变化,用同位素密度测试仪测试无粘结剂刨花板的密度分布,研究了两种不同的热压工艺对洋麻芯无粘结剂刨花板力学性能的影响。在常规的热压过程中,垫子的温度分布不均匀,无粘结剂刨花板的密度分布也不均匀,因此无粘结剂刨花板的机械性能较差。但是在注汽过程中,垫子的热压截面温度分布更加均匀,无粘结剂刨花板的密度分布也更加均匀,同时,由于饱和蒸汽对洋麻芯的预处理作用,无粘结剂刨花板的力学性能也得到改善。得到了很大的改善。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号