【24h】

A STUDY OF CRITICAL HEAT FLUX OF BUTANOL AQUEOUS SOLUTION

机译:丁醇水溶液的临界热通量研究

获取原文
获取外文期刊封面目录资料

摘要

Some alcohol aqueous solution such as butanol shows nonlinear surface tension dependence. Namely, contrary to ordinary liquid or solution, surface tension increases with temperature at the range of high liquid temperature. At the triple-phase point on a heated surface, the thermo-capillary force acts for the liquid to wet the heated surface, so the solutions are sometimes called as "self-rewetting liquid". Self-rewetting liquids may prohibit the dry-out of a heated surface so that the heat transfer performance would be enhanced. For this reason, applications of self-rewetting liquids to heat transfer devices such as heat pipes are actively studied in recent years. However, the heat transfer characteristics of boiling of self-rewetting liquids are not fully understood.In the present research, a boiling experiment of butanol aqueous solution was performed on a heated wire in order to make clear the fundamental heat transfer characteristics, especially Critical Heat Flux (CHF), by changing solution concentration density and liquid temperature in a wide range. Bubbling aspects were observed by high-speed video camera with the rate of 1000 frames per second. It is found from the experiment that CHF is generally enhanced when compared to the case of pure water. CHF increases with concentration density at any temperatures. CHF generally increases with subcooling but at low subcooling region, it once decreases and then increases after taking a minimum. It is also found that peculiar boiling takes place where many tiny bubbles generate and bubbles are unlikely to coalesce. At high subcoolings, the mode of boiling similar to the so-called MEB(Micro-bubble Emission Boiling) was observed. These results of the present experiment indicate a possible application of butanol aqueous solution to high-performance-cooling-devices utilizing micro-channels because generating bubbles are small enough so that the pressure loss of the coolant may be small and the heat transfer rate is sufficiently high even at the saturated condition.
机译:某些醇水溶液(例如丁醇)显示出非线性的表面张力依赖性。即,与普通液体或溶液相反,在高液体温度范围内,表面张力随着温度而增加。在加热表面上的三相点,热毛细作用力使液体润湿加热表面,因此有时将这种溶液称为“自粘性液体”。自润湿液体可能会阻止受热表面变干,从而提高传热性能。因此,近年来,人们积极地研究了自润湿液体在热管等传热装置中的应用。然而,自润湿液体沸腾的传热特性还没有被完全理解。 在本研究中,在加热的金属丝上进行丁醇水溶液的沸腾实验,以通过在宽范围内改变溶液浓度密度和液体温度来弄清基本的传热特性,特别是临界热通量(CHF)。高速摄像机以每秒1000帧的速度观察到气泡的出现。从实验中发现,与纯水相比,CHF通常得到增强。在任何温度下,CHF随浓度密度的增加而增加。 CHF通常随过冷而增加,但在过冷区域较低时,它会先降低然后在取最小值后再增加。还发现特殊的沸腾发生在许多微小气泡产生且气泡不易聚结的地方。在较高的过冷度下,观察到与所谓的MEB(微气泡排放沸腾)相似的沸腾模式。本实验的这些结果表明,丁醇水溶液有可能应用于利用微通道的高性能冷却装置,因为产生的气泡足够小,因此冷却剂的压力损失可能很小,并且传热速率足够大即使在饱和条件下也很高。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号