首页> 外文会议>ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007 >ON DAMPING AND FLUIDELASTIC INSTABILITY IN A TUBE BUNDLE SUBJECTED TO TWO-PHASE CROSS-FLOW
【24h】

ON DAMPING AND FLUIDELASTIC INSTABILITY IN A TUBE BUNDLE SUBJECTED TO TWO-PHASE CROSS-FLOW

机译:两相流对管束的阻尼和流变不稳定性的影响

获取原文

摘要

An experimental study was conducted to investigate damping and fluidelastic instability in tube arrays subjected to two-phase cross-flow. The purpose of this research was to improve our understanding of these phenomena and how they are affected by void fraction and flow regime. The working fluid used was Freon 11, which better models steam-water than air-water mixtures in terms of vapour-liquid mass ratio as well as permitting phase changes due to pressure fluctuations. The damping measurements were obtained by "plucking" the monitored tube from outside the test section using electromagnets. An exponential function was fitted to the tube decay trace, producing consistent damping measurements and minimizing the effect of frequency shifting due to fluid added mass fluctuations. The void fraction was measured using a gamma densitometer, introducing an improvement over the Homogeneous Equilibrium Model (HEM) in terms of density and velocity predictions. It was found that the Capillary number, when combined with the two-phase damping ratio (interfacial damping), shows a well defined behaviour depending on the flow regime. This observation can be used to develop a better methodology to normalize damping results. The fluidelastic results agree with previously presented data when analyzed using the HEM and the half-power bandwidth method. The interfacial velocity is suggested for fluidelastic studies due to its capability for collapsing the fluidelastic data. The interfacial damping was introduced as a tool to include the effects of flow regime into the stability maps.
机译:进行了一项实验研究,以研究经受两相错流的管阵列中的阻尼和流体弹性不稳定性。这项研究的目的是增进我们对这些现象的理解,以及它们如何受空隙率和流动状态的影响。所使用的工作流体是氟利昂11,就蒸气-液体质量比而言,它比空气-水混合物更好地模拟了蒸汽-水,并且允许由于压力波动而引起相变。阻尼测量是通过使用电磁体从测试部分外部“拔出”受监测管而获得的。将指数函数拟合到管衰减迹线,可产生一致的阻尼测量结果,并将因流体增加的质量波动而引起的频移影响最小化。使用伽玛密度计测量空隙率,在密度和速度预测方面引入了对均相平衡模型(HEM)的改进。已经发现,当与两相阻尼比(界面阻尼)结合使用时,毛细管数显示出明确定义的行为,这取决于流动状态。该观察结果可用于开发更好的方法来标准化阻尼结果。当使用HEM和半功率带宽方法进行分析时,流体弹性结果与先前提供的数据一致。由于界面速度能够破坏流体弹性数据,因此建议将其用于流体弹性研究。引入界面阻尼作为一种工具,将流动状态的影响包括在稳定性图中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号