【24h】

Cutoff properties of large-mode-area photonic crystal fibers

机译:大模场光子晶体光纤的截止特性

获取原文

摘要

The cutoff properties of triangular photonic crystal fibers with different core dimensions have been deeply investigated. In particular, 7-rod core fibers, obtained by removing the air-holes belonging to the first ring, as well as the central one in the fiber cross-section, have been considered. A phase diagram which describes the regions of single-mode and multi-mode operation for these large mode area fibers has been calculated with two different approaches. Simulation results have demonstrated that, for a fixed air-filling fraction, triangular photonic crystal fibers with a wider silica core region are single-mode in a smaller wavelength range. As a consequence, also the endlessly single-mode region of 7-rod core triangular fibers is smaller than that of 1-rod core ones. However, by properly choosing low air-filling fraction and relatively small hole-to-hole distance, 7-rod core photonic crystal fibers can provide high effective area values, as well as single-mode operation, without the problem of leakage losses.
机译:深入研究了具有不同纤芯尺寸的三角光子晶体光纤的截止特性。特别地,已经考虑了通过去除属于第一环的气孔以及在纤维横截面中的中心孔而获得的7杆芯纤维。已经用两种不同的方法来计算出一个相图,该相图描述了这些大模面积光纤的单模和多模工作区域。仿真结果表明,对于固定的空气填充分数,具有较宽硅纤芯区域的三角光子晶体光纤在较小波长范围内为单模。结果,7杆芯三角光纤的环形单模区域也小于1杆芯三角光纤的环形单模区域。然而,通过适当地选择低的空气填充率和相对小的孔到孔的距离,七棒芯光子晶体光纤可以提供高有效面积值以及单模操作,而没有泄漏损耗的问题。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号