首页> 外文会议>Proceedings of the Combustion Institute >EXPERIMENTAL STUDY OF NAPHTHALENE FORMATION PATHWAYS IN NON-PREMIXED METHANE FLAMES DOPED WITH ALKYLBENZENES
【24h】

EXPERIMENTAL STUDY OF NAPHTHALENE FORMATION PATHWAYS IN NON-PREMIXED METHANE FLAMES DOPED WITH ALKYLBENZENES

机译:烷基苯掺杂的非半致化甲烷火焰中萘形成途径的实验研究

获取原文

摘要

To study the naphthalene formation pathways of monoalkylbenzenes that are often present in practical fuels, a nitrogen-diluted non-premixed methane flame was separately doped with ≈500 ppm of toluene, ethylbenzene, and the structural isomers of propylbenzene and butylbenzene. Centerline profiles of temperature, stable Cl to C12 hydrocarbons, soot volume fraction, and broadband laser-induced fluorescence were measured in each flame. A significant fraction of the added aromatic rings remained intact and thus provided a foundation for second ring formation. The additives decomposed along two principal routes, which determined the predominant naphthalene formation pathways: when the carbon attached to the phenyl group was secondary (with respect to carbon-carbon bonds), the alkylbenzene rapidly decomposed to form benzyl radical; when the carbon attached to the phenyl group was tertiary or quartary, the decomposition, thermally or through H abstraction, and subsequent β scission resulted in the formation of styrene or methylstyrene. The styrene and methylstyrene further decomposed to phenylacetylene. Naphthalene was formed via two main routes, the H abstraction/C_2H_2 addition (HACA) route and an alternate route through benzyl radical. The relative importance of these routes was strongly dependent on the primary decomposition products of the additives. For instance, the route through benzyl was found to be of major importance for the normal-alkylbenzenes, all of which form large amounts of benzyl radical. The naphthalene correlated closely with the soot volume fractions and broadband laser-induced fluorescence signals. These results confirm that second ring formation is an important rate-limiting step in soot formation in flames fueled with alkylbenzenes.
机译:为了研究实际燃料中经常存在的单烷基苯的萘形成途径,在氮气稀释的非预混合甲烷火焰中分别掺入了约500 ppm的甲苯,乙苯以及丙苯和丁苯的结构异构体。在每个火焰中测量温度,稳定的C1至C12碳氢化合物,烟灰体积分数和宽带激光诱导的荧光的中心线轮廓。很大一部分添加的芳环保持完好无损,因此为第二个环的形成奠定了基础。添加剂沿着两个主要途径分解,这决定了主要的萘形成途径:当连接在苯基上的碳是仲碳时(相对于碳-碳键而言),烷基苯迅速分解而形成苄基。当连接在苯基上的碳原子是叔或四元时,通过热或氢的夺取方式分解,随后进行β断裂,导致苯乙烯或甲基苯乙烯的形成。苯乙烯和甲基苯乙烯进一步分解为苯乙炔。萘是通过两条主要途径形成的:H提取/ C_2H_2加成(HACA)途径和另一途径通过苄基。这些路线的相对重要性在很大程度上取决于添加剂的主要分解产物。例如,发现通过苄基的途径对于正烷基烷基苯是最重要的,它们全部形成大量的苄基。萘与烟灰体积分数和宽带激光诱导的荧光信号密切相关。这些结果证实,第二次成环是在用烷基苯助燃的火焰中烟灰形成中重要的限速步骤。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号