Residual stress measurement in spot welds and the effect of fatigue loading uisng high sensitivity moire interferometry

摘要

Residual stress distribution has been determined in spot welds, which are generally used to join mild steel sheets. Various spot weld configurations were investigated using the full-field, experimental, optical technique of high sensitivity moire interferometry. These stresses were found to be in the range 250-300 MPa (tensile) in the center and decreased to 40-100 MPa (tensile) at the edge of the weld nugget. Low cycle fatigue loading of the spot weld caused the residual stress to drop in the weld center by about 30percent and increase at the edges by as much as 100percent.