首页> 外文会议>Functional Photonic and Fiber Devices >Using very large scale integrated optics (VLSIO) to create high-complexity optoelectronic components
【24h】

Using very large scale integrated optics (VLSIO) to create high-complexity optoelectronic components

机译:使用超大规模集成光学器件(VLSIO)来创建高复杂度的光电组件

获取原文

摘要

Abstract: Optics has the fundamental capability of dramatically improving computer performance via the reduction of capacitance for intrinsic high bandwidth communications and low power usage. Yet optical devices have not displaced silicon VLSI in any measure to date. The reason is clear. When placed into systems, the optical devices have not had significantly greater performance in equally complex information processing circuits and similarly low manufacturing cost. An approach demonstrated here uses the same system integration techniques that have been successful for silicon electronics, only applied to optics. Essential for creation of Very Large Scale Integrated Optics, with over 50,000 high speed logic gates per square centimeter, is a new class of Ultra High Confinement (UHC) waveguides. These waveguides are created with high index difference (as high as 4.0 to 1.0) between guide and cladding. The waveguides have been demonstrated with infrared cross sections less than 5% of a square free space wavelength. These waveguides can be manufactured today only in the mid- infrared, but the concepts should scale to the near-infrared as lithography improves. Waveguide corners have been designed and demonstrated with a bend radius of less than one free space wavelength. Resonators have been designed which have over 100 times smaller volume than VCSELs, yet efficiently interconnected laterally in high densities. A connector to the UHC waveguides has been developed and demonstrated using diffractive optical element arrays on the back side of the substrate. The coupler arrays can allow up to 10,000 Gaussian beam connections per square centimeter. This connectivity also has advantages for low-cost 3D packaging for reduced cost and thermal dissipation. Experimental results on the above concepts and components will be presented.!13
机译:摘要:光学器件的基本功能是通过减少用于固有的高带宽通信和低功耗的电容来显着提高计算机性能。迄今为止,光学设备还没有取代硅VLSI。原因很明显。当放入系统中时,光学装置在同样复杂的信息处理电路中并没有具有明显更高的性能,并且制造成本也同样较低。此处演示的方法使用与仅适用于光学器件的硅电子产品相同的系统集成技术。新型超高限制(UHC)波导对于创建超大规模集成光学至关重要,每平方厘米具有50,000多个高速逻辑门。这些波导是在波导和包层之间以高折射率差(高达4.0到1.0)制成的。已经证明,波导的红外截面小于方形自由空间波长的5%。目前,这些波导只能在中红外条件下制造,但是随着光刻技术的发展,其概念应扩展到近红外。波导角的设计和演示的弯曲半径小于一个自由空间波长。设计的谐振器体积比VCSEL小100倍以上,但在高密度下可有效地横向互连。已开发并使用基板背面的衍射光学元件阵列演示了到UHC波导的连接器。耦合器阵列每平方厘米最多可以允许10,000个高斯光束连接。这种连通性还具有低成本3D封装的优势,可降低成本和散热。将介绍有关上述概念和组件的实验结果。!13

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号