首页> 外文会议>Functional Photonic and Fiber Devices >Numerical simulation of DBR erbium-doped fiber lasers
【24h】

Numerical simulation of DBR erbium-doped fiber lasers

机译:DBR掺fiber光纤激光器的数值模拟

获取原文

摘要

Abstract: It is aim of this paper to present the results of the simulation of DBR fiber lasers throughout a model based on the rate equations for pump and signal power and for the population of the upper laser level. The DBR laser cavity has been considered with two equal fiber gratings; the model considers the effect of the transversal overlap between the pump mode profile, the signal mode profile and the population inversion, the mode competition among longitudinal modes and the up-conversion process due to the formation of clusters of Er ions because of the high dopant concentration. The mode competition has been considered through the saturation effect on the population inversion due to the standing wave of the lasing cavity mode. The overlap integral along the cavity between the saturated population inversion and the nonlasing longitudinal modes with different standing wave pattern allows to determine their threshold condition. Simulations have been performed in order to determine the monomodality region for different value of the peak reflectivity of the Bragg reflector and different cavity length. The threshold of the fundamental and of the adjacent longitudinal mode in presence of the lasing mode, have been determined for two different values of the Er maximum concentration.!9
机译:摘要:本文旨在基于泵浦和信号功率的速率方程以及激光强度上限的速率方程,在整个模型中提供模拟DBR光纤激光器的结果。已经考虑了使用两个相等的光纤光栅的DBR激光腔;该模型考虑了泵浦模式分布,信号模式分布和粒子数反转之间的横向重叠,纵向模式之间的模式竞争以及由于高掺杂物形成的Er离子簇而引起的上转换过程的影响。专注。通过对由于激光腔模驻波引起的总体反演的饱和效应考虑了模竞争。沿饱和腔反演和具有不同驻波模式的非激光纵向模式之间沿腔的重叠积分可以确定其阈值条件。为了确定布拉格反射器的峰值反射率的不同值和不同腔长度的单模态区域,已经进行了仿真。对于两个不同的Er最大浓度值,已经确定了存在激光模式时的基本模式和相邻纵向模式的阈值!9

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号