首页> 外文会议>International Conference on Wearable and Implantable Body Sensor Networks >Wearable wireless sensors for chronic respiratory disease monitoring
【24h】

Wearable wireless sensors for chronic respiratory disease monitoring

机译:可穿戴无线传感器,用于慢性呼吸道疾病监测

获取原文

摘要

We present a wearable sensor system consisting of a wristband and chest patch to enable the correlation of individual environmental exposure to health response for understanding impacts of ozone on chronic asthma conditions. The wrist worn device measures ambient ozone concentration, heart rate via plethysmography (PPG), three-axis acceleration, ambient temperature, and ambient relative humidity. The chest patch measures heart rate via electrocardiography (ECG) and PPG, respiratory rate via PPG, wheezing via a microphone, and three-axis acceleration. The data from each sensor is continually streamed to a peripheral data aggregation device, and is subsequently transferred to a dedicated server for cloud storage. The current generation of the system uses only commercially-off-the-shelf (COTS) components where the entire electronic structure of the wristband has dimensions of 3.1×4.1×1.2 cm3 while the chest patch electronics has a dimensions of 3.3×4.4×1.2 cm3. The power consumptions of the wristband and chest patch are 78 mW and 33 mW respectively where using a 400 mAh lithium polymer battery would operate the wristband for around 15 hours and the chest patch for around 36 hours.
机译:我们提出了一种由腕带和胸贴组成的可穿戴传感器系统,可将各个环境暴露与健康反应相关联,以了解臭氧对慢性哮喘病的影响。腕戴式设备可测量环境臭氧浓度,通过体积描记法(PPG)测出的心率,三轴加速度,环境温度和环境相对湿度。胸部贴片通过心电图(ECG)和PPG测量心率,通过PPG测量呼吸频率,通过麦克风喘息,以及三轴加速度。来自每个传感器的数据连续流式传输到外围数据聚合设备,然后传输到专用服务器进行云存储。该系统的当前一代仅使用现成的商用(COTS)组件,其中腕带的整个电子结构的尺寸为3.1×4.1×1.2 cm3,而胸部贴片电子设备的尺寸为3.3×4.4×1.2立方厘米腕带和胸贴的功耗分别为78 mW和33 mW,其中使用400 mAh锂聚合物电池将腕带操作约15小时,胸贴约36小时。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号