【24h】

Flexible Pulse Sensor Based on PDMS/MWCNTs

机译:基于PDMS / MWCNT的柔性脉搏传感器

获取原文

摘要

In this paper, a flexible conductive composite was prepared by doping MWCNTs (Multi-walled carbon nanotubes) in PDMS (Polydimethylsiloxane). The resistance of the composite changes with the variation of pressure in a certain pressure range. The electrical properties of composites with different PDMS/MWCNTs mass ratios were studied and tested. When the mass of MWCNTs is 8% of PDMS, PDMS/MWCNTs composites are optimal for preparing pressure sensors. Therefore, a PDMS/MWCNTs composite with a mass content of 8% MWCNTs was used to prepare a flexible pulse sensor. The pulse sensor can detect small pressure and has high sensitivity (0.13 kPa^-^1), and has good stability and short response time (<47 ms).
机译:在本文中,通过在PDMS(聚二甲基硅氧烷)中掺杂MWCNT(多壁碳纳米管)来制备柔性导电复合材料。在一定压力范围内,复合材料的电阻随压力的变化而变化。研究和测试了具有不同PDMS / MWCNTs质量比的复合材料的电性能。当MWCNT的质量为PDMS的8%时,PDMS / MWCNTs复合材料是制备压力传感器的最佳选择。因此,使用质量分数为8%的CNT的PDMS / MWCNTs复合材料来制备柔性脉冲传感器。该脉搏传感器可检测到较小的压力,并具有较高的灵敏度(0.13 kPa ^-^ 1),并且具有良好的稳定性和较短的响应时间(<47 ms)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号